Postalloy® DuraChrome™ 2834-SPL
Postalloy® DuraChrome™ 2834-SPL is a high chromium hardfacing alloy that produces a high volume fraction of wear resistant chromium carbides in a tough alloy matrix that is designed for high abrasion or abrasion combined with moderate impact. Deposit will polish in service and is heat resistant to 1000 °F (538 °C). Use on low carbon mild steel, manganese, stainless, and low alloy steels.
Specifications
Product Type
- Wire
- Metal-cored
- Gas-shielded
- Open-arc
Applications
- Tampers
- Dredge bucket lips
- Dredge pump side plates
- Coal pulverizing hammers
- Grizzley bars
- Dredge cutter head & teeth
- Bulldozer blades
- Crusher rolls
- Shredder & Fibrizer Hammers
- Clamshell bucket lips
- Dragline buckets
- Crusher jaws and cones
- Power shovel buckets and teeth
- Gyrator crusher mantles
- Road rippers
- Scraper blades
- Muller tires
Weld Deposit Properties
- Additional:
- Deposits are slag-free
- Deposits cannot be flame-cut
- Deposits will check-crack to relieve stresses
- Deposit Thickness:
- 1-3 layers
- Hardness:
- 55Rc - 60Rc
Welding Parameters
Current Type: DC Electrode Positive
| Volts | Amps | Diameter | Stick Out |
|---|---|---|---|
| 25-29 | 240-400 | 3/32" (2.4mm) | 1"-1¼" (25-32mm) |
| 26-32 | 250-450 | 7/64" (2.8mm) | 1"-1½" (25-38mm) |
Welding Procedure:
When welding out of position, use .045 (1.2mm) with reverse polarity and the lower range of amperages and voltages. Weld vertical down with 3/4" (19mm) wide weave beads. A gas cover will be helpful, especially when using a constant current power source and voltage sensing feeder.
Product Equivalent:
Electrode: Postalloy® 214 Flux-coated Electrode,
Electrode: Postalloy® 215HD Tubular Electrode
Packaging Options
| Diameter | Standard Packaging |
|---|---|
| 3/32" (2.4mm) | 55 lb (25kg) coil, 110 lb (49.90kg) drum, 220 lb (99.80kg) drum |
| 7/64" (2.8mm) | 55 lb (25kg) coil, 110 lb (49.90kg) drum, 220 lb (99.80kg) drum |