Your Global Resource for Industrial Hardface Technology and Wear Resistant Technologies
Product Reference View detailed information about Postalloy® Hardfacing Products
Enter Search Phrase
POSTALLOY® 250, for gouging and grooving all metals, removes unwanted metal with standard AC or DC power sources. For stainless steel or cast iron. Does not require supplementary gas, compressed air or special electrode holders. POSTALLOY® 250 produces an intense, highly concentrated bowing action which virtually blasts molten metal and slag out of its path. Leaves a clean, scale-free, carbon free surface which requires no additional preparation.
The coating constituents in POSTALLOY® 250 are formulated to provide a conductive slag during fusion. This imparts self-starting characteristics to the electrode. This feature enables the welder to pre-place the rod in the exact spot where the metal is to be removed without instantaneous arcing.
Product Type
Flux-coated electrode

Veeing out cracks prior to welding
Gouging out old or defective weld metal
Removing flash and risers
Removing unwanted metal before machining

POSTALLOY® 250    Welding Parameters
Current: AC or DC Straight Polarity
Diameter Amps
3/32" (2.4mm)170-300
1/8" (3.1mm)250-400
5/32" (4.0mm) 300-450
3/16" (4.8mm)350-500

Welding Procedure Point electrode in direction of travel. Angle of electrode should be almost parallel to weld or crack. Strike arc. Push electrode along quickly for a shallow groove, more slowly or with a weaving motion for deeper groove.
Packaging Options
Standard Packaging
3/32" (2.4mm)
Resealable Plastic Box
1/8" (3.1mm)
Resealable Plastic Box
5/32" (4.0mm)
Resealable Plastic Box
3/16" (4.8mm)
Resealable Plastic Box