2832-SPL

Product Reference View detailed information about Postalloy® Hardfacing Products

POSTALLOY®

2832-SPL

Description

Tooth Adaptor

Postalloy® 2832-SPL is a premium chromium carbide hardfacing alloy that has a high volume fraction of carbides dispersed in a hard matrix. For applications involving high abrasion and mild or moderate impact. Deposit polish in service and are heat resistant to 1000°F (538°C). Use on carbon, low alloy steel, and manganese steel.

Specifications

Product Type

Wire: Metal-cored, open-arc or gas-shielded
Deposits are slag-free

Electrode equivalent: POSTALLOY® 214 or POSTALLLOY® 215HD

Weld Deposit Properties

Average Hardness

58-62Rc

Deposit Thickness

1-2 layers

Deposits cannot be flame-cut

Deposits will check-crack to relieve stresses

Applications

Scraper blades
Auger flights
Road ripper teeth
Screw conveyors
Shredder & Fibrizer Hammers

Bucket teeth
Bucket sides and bottoms
Mixer blades
Tillage tools
Fan blades

POSTALLOY® 2832-SPL Welding Parameters

Current: DC Straight or Reverse Polarity

Diameter

Amps

Volts

Stick Out

.045" (1.1mm)

140-200

18-24

3/4"-1"(19-25mm)

1/16" (1.6mm)

170-300

22-28

1"-1¼"(25-32mm)

3/32" (2.4mm)

240-400

25-29

1"-1½"(25-38mm)

7/64" (2.8mm)

250-450

26-32

1"-1½"(25-38mm)

Welding Procedure

When welding out of position, use .045 with reverse polarity and the lower range of amperages and voltages. Weld vertical down with 3/4"(18mm) wide weave beads. A gas cover will be helpful, especially when using a constant current power source and voltage sensing feeder.

Electrode equivalent: POSTALLOY® 214 or POSTALLLOY® 215HD

Packaging Options

Diameter

Standard Packaging

Special Packaging Available

.045" (1.1mm)

25 lb spool

110 lb drum

1/16" (1.6mm)

25 lb spool

55 lb coil, 110 lb drum

3/32" (2.4mm)

55 lb coil, 110 lb drum

7/64" (2.8mm)

55 lb coil, 110 lb drum