Your Global Resource for Industrial Hardface Technology
and Wear Resistant Technologies
Enter Search Phrase
Product Reference View detailed information about Postalloy® Hardfacing Products
POSTALLOY®
2820-SPL
Description
Postalloy® 2820-SPL is a chromium carbide hardfacing alloy that produces a controlled microstructure of specially sized carbides in a very tough matrix. For applications involving high impact combined with abrasion. Weld metal is tougher than conventional chromium carbide alloys with fewer stress relieving check-cracks. Use on carbon, low alloy, and manganese steels.
Specifications
Product Type
Wire: Metal-cored, open-arc or gas-shielded.
Deposits are slag-free.

Weld Deposit Properties
Hardness
47-52Rc
Deposit Thickness
3-5 Layers
Cannot be flame-cut

Applications
Final overlay on crusher jaws
Impact breaker bars
Cone and roll shells
Pulverizing hammers
Hammer mill hammers

POSTALLOY® 2820-SPL    Welding Parameters
Current: DC Reverse Polarity
Diameter
Amps
Volts
Stick Out
.045" (1.1mm)
100-250
15-26
3/4"-1"(19-25mm)
1/16" (1.6mm)
160-300
20-25
1"-1¼"(25-32mm)
3/32" (2.4mm)
250-350
23-26
1"-1½"(25-38mm)
7/64" (2.8mm)
250-450
24-30
1"-1½"(25-38mm)

Welding Procedure
While all sizes of POSTALLOY® 2820-SPL will easily operate with or without a gas cover, you may find applications for .045" and 1/16" for which you prefer a shielding gas. If a gas cover is used, Argon/CO2 or 100% CO2 is recommended. This will cause amperages to go up by about 10% and the stick-out should be shortened.

When welding out of position, use the lower range of amperages and voltages. In addition, a gas cover may be useful, especially when using a constant current power source and voltage sensing feeder.


Packaging Options
Diameter
Standard Packaging
Special Packaging Available
.045" (1.1mm)
25 lb spool
110 lb drum, 220 lb drum
1/16" (1.6mm)
25 lb spool
110 lb drum, 220 lb drum
3/32" (2.4mm)
55 lb coil
7/64" (2.8mm)
55 lb coil
110 lb drum